another wheel thread

[timgco]

Originally Posted by Sewie

Those won't fit. Too much backspacing and the center bore is waaaay too small.

Stock BS is 5"or 5.5". The center bore is 100.6mm.

It's going to be hard to find a hub-centric wheel for the H3. Especially since most sites don't list it in the specs. You'll most likely have to get a lug-centric wheel with a 108mm center and use hub rings if you end up with vibration. Wheels for a 6-lug Toyota will usually work, just check the backspacing.

Here's the smae rim with a 108mm with 5 1/8" bs.
175-8883B 18x8.5 5 1/8 +10 6-5.5 89-8126 108mm 2200 31

http://www.ultrawheel.com/wheel_deta...brand=1&id=190


IS this worth ordering and giving it a shot or do I need to be 4 3/4 bs or somewhere around there? I have a VM into Ultra now to see what they say.