Wire for heated seats?

[splne1]

DAMN!!!! thats a great idea!!! Let me know how that goes I have a remote start and that would be a very nice touch to add!!!

[Planohummer]

have your alarm folks do this. they need to trigger past relay. seat heater controlled by driver door module, triggered by class 2 data line via body control module. if you screw something up you're gonna let the smoke genie out.

[[__--MUD--__]]

Originally Posted by Planohummer

have your alarm folks do this. they need to trigger past relay. seat heater controlled by driver door module, triggered by class 2 data line via body control module. if you screw something up you're gonna let the smoke genie out.

The dealer that put in my viper said same thing, the module that connects to the data bus should automatically turn on my heated seats when it gets around 32 degrees out.

Havnt hit that condition yet, so no clue if it actually works

[HUM-Dinger]

I know it turns on at 32 degrees but I would like to turn it on myself when it's 40 or even 50 degrees out.

[[__--MUD--__]]

If it didn't have the serial data bus, then i'd say tap in..but now that everything run through basically a computer network, the relays and controls are triggered w/ data, not a raw power signal.

I know you can make the windows roll up or down w/ that module also if your keyfob has an extra channel. I"ve never seen a list, nor know what other options are available for triggering.

Im sure someone can post the schmatic on the heated seat curcuit.