2 Inch Lift on H2.

[RippSpeed]

Originally Posted by Cesardajr

OK that's what the fox shocks 2.5's cost, so your getting free installation.
but shop around you might be able to get a better price on the fox's.
try downsouthmotorsports.com

Fox Shocks 2.5's are $400 retail each corner thats $1600 total... The owner of the shop quoted me $1300 installed and out the door. The website you gave me charge $379 each for FOX 2.5's thats more than what I've beeb quoted and thats not even installed...

The thing is should I get the factory replacement FOX Shocks for the H2 or get something else because I'll be doing the torsion key lift when this gets installed....

[Cesardajr]

the fox 2.5 shocks you want are a special part number
Front 980-99-316A
Rear 980-99-317A
the ones on his website are much bigger in size.
you would have to call him and ask what his best price is, it just a option.
the website is one a few buddys used and got better pricing on the fox shocks for there off road buggys. i bought my 4 for $1264 shipped from rod hall racing website.
i have these on the h2 with the torsion key lift and they work great. the shocks are installed without the shock spacer brackets, they dont need them.
if you come down to san diego you can check my h2 out if you like.

[Bimmer9938]

Anybody else know of a more affordable upgrade shock upgrade for the Truxxx 2.5/3F-1.5R Lift?

[OrangeCrush]

Originally Posted by Bimmer9938

Anybody else know of a more affordable upgrade shock upgrade for the Truxxx 2.5/3F-1.5R Lift?

Yeah, buy a set of bilsteins (roughly 80 bucks a shock) for an HD2500


Mark

[EastTexan]

I have had half a dozen Chevy trucks that I just cranked the torsion bars on, including two 2500HDs, and they did okay. On my 2005 2500HD I installed the Cognito Motorsports leveling kit (2 - 3") with the shock extensions and Bilsteins, and now I have a solid 12" clearance under the front skid plate with 33" tires and love the ride quality.

Tomorrow on my 2008 H2 SUV Lux I am having installed some keys ($90 w/ s&h off ebay, with shock extensions), (I know now that I should have just bought the GM green leys and skipped the extensions), and 2" rear spring spacers ($42 w/ s&h off ebay). I told the installer to just raise the front 2" and leave off the shock extensions. Of course I will also have it aligned.

I am sticking with the stock 35" tires until they need replacing, and am leaving off the shock extensions.

I like the factory rake. Besides, without the rake, when you put a load on, it would look like the rear end was sagging.

If I don't like the ride or vibration or something else doesn't jive I will take the next step - the Cognito Motorsports leveling kit (2 - 3").

[Bimmer9938]

I've read that those e-bay keys break, I'd send them back. Besides the Truxxx have a lifetime warranty.

[EastTexan]

There are many different keys on eBay. The Truxxx keys are made of solid steel that are laser cut. The $90 keys I bought are made of forged steel. The stock keys are cast steel. I think the $90 forged steel ones will be less likely to break than the stock cast steel ones.

[RippSpeed]

Originally Posted by Cesardajr

the fox 2.5 shocks you want are a special part number
Front 980-99-316A
Rear 980-99-317A
the ones on his website are much bigger in size.
you would have to call him and ask what his best price is, it just a option.
the website is one a few buddys used and got better pricing on the fox shocks for there off road buggys. i bought my 4 for $1264 shipped from rod hall racing website.
i have these on the h2 with the torsion key lift and they work great. the shocks are installed without the shock spacer brackets, they dont need them.
if you come down to san diego you can check my h2 out if you like.

with those fox shocks and the torsion key lift... is your H2 leveled ???

[Cesardajr]

i have a slight prerunner look. i have the h2 a bit over level, this way when i hit jumps the 37's have a little more travel.
depending on the jump the tires rub the wheel well plastic cover.