 |
|
02-20-2009, 04:54 PM
|
|
Hummer Novice
|
|
Join Date: Jul 2008
Posts: 18
|
|
Re: 2 Inch Lift on H2.
What are the Bilstein part numbers for an H2 with 2 - 3 inch lift? What about the Bilstein part numbers for a 2500HD shock to fit the H2 with a 2 - 3 inch lift?
|
02-21-2009, 07:21 PM
|
 |
Hummer Veteran
|
|
Join Date: Jan 2008
Location: High in the Colorado Rockies
Posts: 210
|
|
Re: 2 Inch Lift on H2.
Quote:
|
Originally Posted by EastTexan
What are the Bilstein part numbers for an H2 with 2 - 3 inch lift? What about the Bilstein part numbers for a 2500HD shock to fit the H2 with a 2 - 3 inch lift?
|
You have two choices:
Bilstein F4-BE5-6243-H5
12" compressed, 19" extended, 7" travel,
It is 389/94 valving which is pretty firm.
Bilstein BE5-6140-T5
11.77" compressed, 18.42" extended, 6.65" travel.
It's valved at 366/240which is very similar rebound, but much firmer compression giving a much firmer ride. Both shocks will work, one will be firm and the other will be really firm.
__________________
'05 H2 Lux, 37" KM2's on 17" Hutchinson Double Beadlocks, Cognito UCA's, Cognito Sway Bar Links, Custom Hydro-Assist Steering Upgrade, Eaton Front Differential Locker, 1" Rear Coil Spacers, Chevy Green Key Torsion Bar "Lift," Bilstein Shocks, Warn 9.5ti Multimount Winch, Dual Optima Yellow Top Battery's, Piaa & Hella Off-road lights, Gobi Rack, Tru-cool External Transmission Oil Cooler, Diablo Predator Hi-Octane Tune.
|
02-22-2009, 05:23 AM
|
|
Hummer Novice
|
|
Join Date: Jul 2008
Posts: 18
|
|
Re: 2 Inch Lift on H2.
Very cool, thanks. They are advertised to fit 4" lift F150/250.(?)
|
02-22-2009, 05:30 AM
|
|
Hummer Novice
|
|
Join Date: Jul 2008
Posts: 18
|
|
Re: 2 Inch Lift on H2.
Which Bilsteins did you put on the back?
|
04-05-2009, 07:09 AM
|
 |
Hummer Guru
|
|
Join Date: Jan 2004
Posts: 7,060
|
|
Re: 2 Inch Lift on H2.
btt, any updates, pics, good, bad, great? 
__________________
TAIL RATED!
|
05-03-2009, 08:59 PM
|
|
Hummer Veteran
|
|
Join Date: Jan 2008
Location: Hot Springs, Arkansas
Posts: 151
|
|
Re: 2 Inch Lift on H2.
UPDATE:
I just had the Cognito 2-3" lift put on the H2. It is a fantastic kit and installation was easy.
Before my rear end was obviously higher than my front, just like every other stock H2. Now, my rear is still at 42" (bottom of fender to ground) and my front end is 43 1/2". Thus, this kit easily gave me 2" of lift if not more.
DUCK
__________________
2003 H2, Lux & Adv Packages, Cognito 3" front suspension lift, Gobi Stealth Rack w/ Ladder, Navigation, twin Optima battery setup, AirRaid Intake, Granatelli Mass Air Flow Sensor, Flowmaster Big Block II Exhaust, Diablosport Predator Programmer,Cognito Pitman/Idler Arm Kit, Fabtech Tie Rods, Rancho RS 9000 shocks, Warn bumper and 9.5x winch, Warn light bar, PIAA's everywhere (14), everything blacked out, and rollin' on 39.5" Super Swamper IROKs on black powdercoated stock wheels.
|
05-04-2009, 01:40 AM
|
 |
Hummer Expert
|
|
Join Date: Sep 2007
Location: Mason, OH
Posts: 779
|
|
Re: 2 Inch Lift on H2.
Did my lift yesterday acutally. I made spacers for the rear airide springs. Then did the Green Keys for the front. The end result of my lift was about
1-1/4" of lift in the front. and about 2-1/2" in the rear. I also have 37" tires so the truck is rideing 2-2 1/2" hirer than stock. Over all it looks really good. With me only going a little 1-1/4" inches hirer in the front I did not do new shcoks. However..... When I do get new the full cognito set up I will go further up
|
05-04-2009, 01:41 AM
|
|
Hummer Expert
|
|
Join Date: Sep 2007
Location: Mason, OH
Posts: 779
|
|
Re: 2 Inch Lift on H2.
Did my lift yesterday acutally. I made spacers for the rear airide springs. Then did the Green Keys for the front. The end result of my lift was about
1-1/4" of lift in the front. and about 2-1/2" in the rear. I also have 37" tires so the truck is rideing 2-2 1/2" higher than stock. Over all it looks really good. With me only going a little 1-1/4" inches higher in the front I did not do new shocks. However..... When I do get new the full cognito set up I will go further up.
|
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
 Hybrid Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT +1. The time now is 11:24 PM.
|
