Vizualogic Help Please

[Luv2Camp]

For anyone that still wants to try, I have the pinout diagram for the Vizuologic Advantage system

On the Mini_din, there are 8 posts and the outside ring(shield) is a ground. For reference, if you look at the mini-pin staight on, there will be 3 pins on the top row, 3 on the middle row and 2 on the bottom row. Pin 1 is the bottom left pin, #2 is the bottom right. #3 is the middle left, #4 is the middle pin in this center row and pin #5 is the right pin on this row. Pin 6 is the upper left pin, Pin 7 is the center pin on the top row and pin 8 is the right pin in the upper row. I have confirmed these connections but strongly suggest you do the same just in case there have been any spec changes I am not aware of)

Pin Description Wire Color
1 +12V Black (shiny)
2 Audio R + Blue
3 Audio L + Green
4 Video Red
5 Video Ground Black
6 IR Brown (shiny)
7 Parking yellow (Shiny
8 AV Select Purple (Shiny)

On the other end of the harness (the monitor side, the white wire is the Audio left ground and the yellow wire is the audio right ground. These both are connected to tyhe mini-pin ground shield.)