|
#1
07-08-2010, 05:50 PM
Hummer Professional
Join Date: Nov 2008
Posts: 261
Re: How was my truck leveled?
Does anyone know if those are the stock bump stops? Are the stock ones supposed to be touching the LCA?
Can anyone say how I would tell if the keys have been changed or just cranked?
Anybody? 
__________________
2005 H2 SUV - Stealth Gray with Ebony interior - Third row - Exterior tire carrier -
Mirror caps - black bedliner
Roof rack rails - black bedliner
Wheels - Black bedliner on stock wheels
Gas cap lid - still chrome but will soon be black bedliner
Tail light guards - still chrome but will be black bedliner
Grill - Still chrome but will be black bedliner
Hmmmm, is there a pattern developing here?
#2
07-10-2010, 04:15 PM
Hummer Veteran
Join Date: Nov 2008
Posts: 143
Re: How was my truck leveled?
The bump stops on on my stock suspension do touch the LCA, the keys are just as rusted and the bolt looks like it hasn't been turned up on yours. The only difference that I can see is that your torsion bar sits a LOT snugger in the LCA hole then mine. So it looks like you got some new LCA or your ass doesn't sit as high as rest.
I measured the back but it has been sitting for the past month with no start, "160 Overhaul"
__________________
Missing the times when things where made to last.
#3
07-10-2010, 04:56 PM
Hummer Professional
Join Date: Nov 2008
Posts: 261
Re: How was my truck leveled?
Hmmm. I'll have to measure it front and back and see where it sits. Anyone know what the normal range is for stock height? I guess I'll measure to the lip of wheel opening.
__________________
2005 H2 SUV - Stealth Gray with Ebony interior - Third row - Exterior tire carrier -
Mirror caps - black bedliner
Roof rack rails - black bedliner
Wheels - Black bedliner on stock wheels
Gas cap lid - still chrome but will soon be black bedliner
Tail light guards - still chrome but will be black bedliner
Grill - Still chrome but will be black bedliner
Hmmmm, is there a pattern developing here?
#4
07-10-2010, 05:47 PM
Hummer Veteran
Join Date: Nov 2008
Posts: 143
Re: How was my truck leveled?
Like i said, I haven't started this truck in a while so I don't know how accurate this measurement is.
__________________
Missing the times when things where made to last.
Last edited by jarek m : 07-10-2010 at 05:54 PM.
#5
07-19-2010, 10:23 PM
Hummer Authority
Join Date: Jan 2008
Location: Gaithersburg, MD
Posts: 1,763
Re: How was my truck leveled?
Quote:
Originally Posted by Scarsman
Hmmm. I'll have to measure it front and back and see where it sits. Anyone know what the normal range is for stock height? I guess I'll measure to the lip of wheel opening.
I always take measurements from the ground up to the front and then the back of the rock bars on each side. If I remember right, mine is 18" at all four points...that's with BFG 37s and a Cognito leveling kit.
__________________
CNTRY
DTOM
«
Previous Thread
|
Next Thread
»
Thread Tools
Search this Thread
Display Modes
Posting Rules
All times are GMT +1. The time now is 11:00 PM.
Hybrid Mode