H3 Passenger Sun Visor Removal...

[Ricovette]

Originally Posted by fourfourto

If you pull(tug) the wire from the headliner theres has to be a plug a few inches in. ?

I thought about doing that since there was some considerable slack inside the roof, but I didn't want to take the chance and damage the wire just in case I was wrong. Thought I'd come here and ask the experts first. Appreciate your assistance very much. I'll go and tug on it gently and see if the connector pops up anywhere. Stay safe... "Rico"

[H3 Builder]

Here is a basic headliner and how the wiring looks underneath. The wire connector should be right there. Here is the pictures.

[Ricovette]

Originally Posted by H3 Builder

Here is a basic headliner and how the wiring looks underneath. The wire connector should be right there. Here is the pictures.

Thank you...Thank you...Thank you... That's exactly what I needed. If there's anything I can ever assist you with in the Sarasota, Florida area, please don't hesitate to give me a shout. Once again, thank you so much! I just purchased a new sun visor for $147.00 and the dealer wanted $120.00 to install it. To remove three screws, unplug and plug in the new one = $120.00 at the dealer...that's just not right. Hope you have an awesome weekend... "Rico"

[Ricovette]

Hey guys... Just finished installing the Sun Visor after waiting for it to arrive from the dealer. Thanks to your help and assistance, I was able to take down the damaged Sun Visor and install the new one in less than 15 minutes. It turned out perfect! I even switched out the factory bulbs with L.E.D.'s. Remember, the dealer wanted $120.00 just to install the Sun Visor. I owe you guys big time... Once again, thank you so very much... "Rico"