Method Race Wheels and Toyos!

[HummerJim]

I like it as is, but a very thin red pin stripe down the side would set off the red wheel bolts. Keith did the black wheels on his black SUT several years ago and did the wheel beadlock bolts in silver with a silver pinstripe just over the door handles that extended into the groove on the side of the SUT bed. He's not a member of this forum,but I'm sure there's a picture of it somewhere in one of the Lynch Hummer outings.

[LoJac963]

the wheels are very nice, maybe a possibility for me. Do the bolt heads come out at all or are they not removable?

[21sH2]

LoJac963 - yes the bolts are removable.

devilsfan - I have about an inch of clearance to get into my garage or I would love to put a lift on it.

I just removed the spare tire yesterday and getting my rear tow hooks and tail guards sprayed red next week. Tomorrow I'm going to get some measurements so I can draw up a license plate mount in CAD and have a buddy of mine plasma cut it this weekend.

I'm planning on also spraying a few other parts red as well, including deciding whether or not to spray the brushguard a buddy is building me all red or black. Not sure whether having the brushguard red will be too much. What do you guys think?

[LoJac963]

cool, thank for the info. Do you have a small lift, tbars cranked with spacers? I'm curious because you said there is only an inch of clearance for the garage. I'm thinking about keys and spacers along with 37's for mine but I don't know if I'll still be able to get in the garage. I have roughly 4-5 inches of room to play with (that includes the roof cross bars)

[21sH2]

Originally Posted by LoJac963

cool, thank for the info. Do you have a small lift, tbars cranked with spacers? I'm curious because you said there is only an inch of clearance for the garage. I'm thinking about keys and spacers along with 37's for mine but I don't know if I'll still be able to get in the garage. I have roughly 4-5 inches of room to play with (that includes the roof cross bars)

I turned the torsion screws a couple times a long time ago. I doubt i'd fit into my garage if i swaped to green keys and a rear spacer. I also have my roof bars on but I only have 35x12.50r17s Toyo MTs.