Bulb change - filament to LED

[LoJac963]

Originally Posted by [__--MUD--__]

I'd try putting the stock bulbs back in, see if they function correctly. If they do then you may need to put a resistor or other component inline w/ the led.

thats correct, mine did the same thing. I put my stockers back in the map lights when I had all my dash and console apart-I put those LED's into the console shifter lights but anyway the issue went away.

[smileynialley]

As promised. excuse the photo's they are taken from my phone and i don't think they do the interior justice. They make the new bulbs look harsh and too bright but they aren't. they give off a modern, cool look to the interior.



I'm still waiting for a few more bulbs to arrive due to a few of the breaking in transit. these will replace the filament bulbs in the boot dome light.
Altogether you will need 6 festoon style bulbs and 8 side light style bulbs. Ebay has all of this and i only paid around ?10 for all 14 bulbs. Each bulb is very easy to replace. the doors and floor light covers just pop out with a screwdriver, the middle and rear dome light cover pops open form the left side and the 2 front map lights can be accessed if u pry open the difusers using a small flat head via a small notch on one side of the circular difuser.