 |
|

04-24-2013, 09:04 AM
|
Hummer Novice
|
|
Join Date: Mar 2009
Location: Portland, OR
Posts: 11
|
|
Re: Ignition Switch & dead battery fix
I am having a Similar Issue, Pull key out and Lights + The Radio Stays On? Remove the WS WPR 25A Fuse and it works As it Should? Would the Ignition Switch cause this? Or should I look elsewhere?
Last edited by Contract_Pilot : 04-24-2013 at 10:27 AM.
|

04-24-2013, 06:56 PM
|
 |
Hummer Authority
|
|
Join Date: Sep 2003
Location: Canada
Posts: 1,251
|
|
Re: Ignition Switch & dead battery fix
__________________
1987 Jeep YJ 403hp sbc 653hp on NOS
1998 Chev Z71
2007 Chev Trailblazer SS
|

04-25-2013, 12:24 AM
|
Hummer Novice
|
|
Join Date: Mar 2009
Location: Portland, OR
Posts: 11
|
|
Re: Ignition Switch & dead battery fix
HumTech
I Swapped the Ignition Switch, Swapped relays, Removed Cowl (PITA), Un Plugged Wiper Motor, No Go, Un Plugged wiper module what would you know same as taking the fuse out. Well I think i have a bad Wiper Module any other place I should look, I did have some corroded and bad solder connections I touched them up and still not go odd thing is my wipers work just fine.
And part number for wiper control Wiper/Washer Module
I pull the washer Relay and I get wipers but not interment and the thing works like it should..
I came up with part number 19120103
Part on order and will update....
Last edited by Contract_Pilot : 04-25-2013 at 09:53 AM.
|

04-27-2013, 12:20 AM
|
Hummer Novice
|
|
Join Date: Mar 2009
Location: Portland, OR
Posts: 11
|
|
Re: Ignition Switch & dead battery fix
Quote:
Originally Posted by Contract_Pilot
HumTech
I Swapped the Ignition Switch, Swapped relays, Removed Cowl (PITA), Un Plugged Wiper Motor, No Go, Un Plugged wiper module what would you know same as taking the fuse out. Well I think i have a bad Wiper Module any other place I should look, I did have some corroded and bad solder connections I touched them up and still not go odd thing is my wipers work just fine.
And part number for wiper control Wiper/Washer Module
I pull the washer Relay and I get wipers but not interment and the thing works like it should..
I came up with part number 19120103
Part on order and will update....
|
Update 04/26 got the part will update later today once I get it installed.. Installed, Washer Relay back in and working as it should..
Last edited by Contract_Pilot : 04-27-2013 at 03:41 AM.
|

04-27-2013, 04:54 AM
|
 |
Hummer Authority
|
|
Join Date: Sep 2003
Location: Canada
Posts: 1,251
|
|
Re: Ignition Switch & dead battery fix
So its fixed? Wiper module?
__________________
1987 Jeep YJ 403hp sbc 653hp on NOS
1998 Chev Z71
2007 Chev Trailblazer SS
|

04-27-2013, 08:01 AM
|
Hummer Novice
|
|
Join Date: Mar 2009
Location: Portland, OR
Posts: 11
|
|
Re: Ignition Switch & dead battery fix
Quote:
Originally Posted by HUMTECH
So its fixed? Wiper module?
|
Yes, It was the Wiper module! But I ended up breaking 2 clips on the cowling there were rusted out. Need to find the replacement part numbers order a set of 4 the other 2 dont seem to be gripping as they should either.
|

04-27-2013, 01:22 PM
|
Hummer Authority
|
|
Join Date: Oct 2003
Posts: 1,118
|
|
Re: Ignition Switch & dead battery fix
Bought my clips here http://www.clipsandfasteners.com/GM_...r_p/a20860.htm
Ended up with more than needed but at the time I could not find them any where. Might use part number to see if you can get them cheaper.
I had a wiper module problem (ran all the fluid out of the tank to the rear wiper) and found that there was condensation in the module, dried it out and was go to go and been good since. Then they put out a recall on the 2003 models for the module. here is a post on that http://www.elcovaforums.com/forums/s...ad.php?t=35772
Congrats on fixing yours,
Ed
Last edited by Easy Ed : 04-28-2013 at 01:13 AM.
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Hybrid Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT +1. The time now is 01:59 AM.
|