H2 under hood insulation pad

[LoJac963]

yeah unfortunately that's for most. To buy a new one for out Sky Redline the shipping is almost $200....its a joke!

[HummerMann]

I just got the Email this morning that the H2 under hood pad is in stock again and I'm having it shipped from GM parts direct. Yes, the shipping and handling is outrageous, but I want to get one while they are still available and try to keep the mice from eating this one. Do those big black disks that hold it in place just pull out? I wonder if the pad will come with new disks?
While I'm at it, I ordered new radiator hoses and a new engine belt. My radiator coolant recovery tank has a deep gouge on top and is discolored so I ordered one of those. Last night I pumped out the power steering fluid and replaced that too. It's time to give the H2 some love.

[HummerJim]

You'll have to post a before and after picture when you are done. I'm really not sure about those disks either. I think? they just pull out??

[fyr145]

Hummer Man,

Funny you should mention this very part. I just ordered the under hood pad as well as mine is faded, and peeling off on one side.

HummerJim, I began wondering about those little black plastic clips too. The clips are a completely separate part. There are a total of 9 of those clips, 4 across the top, 2 in the center, and 3 along the bottom. Fortunately, I have a tool that will help me get those off.Its similar to those tools used to pop the clips off on the doors. My pad should be here soon. If for some reason I destroy one of them, I will simply order replacements. They are available form many places other than the dealership.

I attached a pic of the under hood clip here. OEM part # 15800593

[LoJac963]

typically those style push in retainers will be fine to pop out once and reuse. If you've popped them out a bunch of times the little barbs will begin to fail and the retained won't hold. But as I mentioned popping them out for the first time and reusing them will be fine....unless you break one which you shouldn't.

[fyr145]

I used to use flat head screwdrivers and just destroy retainers like these, then one day I got smart (if you can believe it) and got the right tool that makes popping these off a breeze!!!

Lesson learned: Spending a few $$ to have the right tools always make the jobs easier and less stressful.

[HummerJim]

After a month wait I got the pad from GM parts direct yesterday. Those fasteners pop off with your fingers and can be reused. A ten minute job that makes a world of difference when you open the hood. I'm not sure if the old one was ragged from the years of driving or the mice nibbled on it.