Air Conditioning Cabin Filter

[tourtek]

Mine was also a July 02 delivery, and I can tell you after looking twice down there, that there is no access door for a filter. The whole area is sealed closed. You can see where the screws that would have released the filter door should have gone, but there are just empty holes. There is also no vent area on the bottom as shown in the photo, just solid plastic. I can tell you that if mine had a filter there would likely be NO AIR coming through the AC at this point. I have run this truck through the many miles of silt beds in Baja and the Nevada desert, pre-running the race courses. I have also had the entire cab filled with silt and sand upon dropping into one of these silt bed/"tank traps" at excessive speed having failed to put the system back on recirculate after shutting down the engine. This would indicate to me that, at least , my rig has no filter. There are some guys who check out this site periodically, who could solve this mystery once and for all, if they choose. I'll leave that up to them to respond. A re-usable, readily accessible, easily cleaned, cabin filter would be a great addition to the H2 in my opinion. Any way to keep all the crap from blowing out of the duct work into yer face when you go from recirculate back to normal HVAC mode would be an great improvement.

P.S. Does anyone know of someone who makes a HEAVY DUTY FRONT SKID PLATE for the H2? I have been through 3 stock ones so far and am looking for one of at least twice the stock thickness and of solid construction, no ladder type. I'll post this as a seperate thread also. Thanks