PhilD...
I was looking for a DPDT switch for my light project when I ran across that switch module. I am still in the design phase of the project and gathering up parts for a wire harness upgrade which can handle over 700 watts of lighting if need be .
I am installing Cibie E-Code headlamps which can handle upto 160W H4 bulbs, 150W KC Daylighters, converted DRLs to #507 Petersen incadesent sealed beam floods which come on with low headlamps and still retain normal DRL/Perimiter lighting functions (the 507s really helped fill in the dark areas of the stock low headlamps and don't blind oncoming traffic BTW). Will also have provision for projector fogs if I find a set that will fit in the cutouts along side the front tow hooks.
The switch module gives the capability of being able to control all the lighting with the dimmer switch, turn on seperately, disable all. I use the module to control 6 Hella relays that do the actual switching. BTW Daniel Stern has some quality Hella relay blocks that lock togather and make an attractive bank of relays.
I have detailed wiring diagram. Tried to post it, but the file is too big. If interested let me know and I will e-mail it.
Don
[This message was edited by Hummie2 on March 19, 2003 at 09:22 AM.]
|
03-19-2003, 03:13 PM
Posting Rules
Threaded Mode