Remote start and Nav conflict

[marin8703]

hey everyone, this really isnt a problem, more of an inconvenience, but i would like to take care of itif possible.

I currently have the Pioneer avic z1 installed and also a remote start. the inconvenience is that when i remote start the truck everything hooked up as an accesory come on, as it should. However if I turn the truck off by remote, everything turns off except for the readio, which i think will turn off with a delay (dont know if its 20 minutes or whatever), unless a door is opened. So when the radio stays on two things happen. Every minute or so the alarm triggers because of the music playing and causing the audio sensor and if loud enough the shock sensors to trigger. This is a big inconvenience. The other thing is that the display is on and it is really bright and noticable, so im affraid of someone taking it with them.

So would there be a way that i can hook up the z1 differently or put a relay somewhere that i can activate with the remote so that i can remotely turnt the unit off, kind of simulating an open door so that the circuit turn off, but not to really do anything with the door triggers so that the alarm doesnt trrigger. i was thinking of putting a relay on the constant 12, but i want it to shut down through its regular procedure, not just cut power to it.

I wish i could put some info on here of the current hook up so that someone could help, but i don't really have a diagram or anything, im hoping someone that has the z1 or is familiar with the hook up can help.

Apreciate any help, thanks!

PS. sorry for the long essay.