|
#5
11-01-2005, 11:40 AM
Hummer Professional
Join Date: Sep 2004
Location: Dallas
Posts: 406
Trying to fix a "creek" noise without actually hearing it in person is next to impossible.
But I'll take a wild stab at it.
Check your front lower control arm bolts for being loose.
#7
11-01-2005, 01:09 PM
Hummer Veteran
Join Date: Aug 2005
Posts: 65
I have a 2006 suv. I am noticing a flex, creek, loose chain noise at speeds under 10 mph. It sounds like it is coming from the l rear tire area. I was thinking it was from the release of brake pressure. It also sounds like a loose shield. I can reproduce the noise by lightly accelerating from a stop with a slight turn of the wheel. I crawled under and all shields appeared to be tight. I brought the H2 into the dealer and they stated "Operating per design". This is driving me nuts. You can hear it over the radio. I know there is something wrong, I have been told by bystanders that something must be loose. I am bringing the H2 back in for service this afternoon. Any info on what I should tell them to check?
#8
11-01-2005, 01:39 PM
Hummer Expert
Join Date: Feb 2005
Location: Helsinki, Finland
Posts: 682
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by VTSTOMPER:
I have an odd flexing noise when I drive slow i can hear it. It sounds like dry bushings. </div></BLOCKQUOTE>
I testdrove a new 2005 SUT in Denver six weeks ago, and it sounded really "lazy" over bumps. It had that weird little squeeking noice over every bump...
__________________
Image's nothing-BOOST IS EVERYTHING
#9
11-01-2005, 05:26 PM
Hummer Guru
Join Date: Jan 2005
Location: Oregon
Posts: 4,321
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by gcraybas:
I have a 2006 suv. I am noticing a flex, creek, loose chain noise at speeds under 10 mph. It sounds like it is coming from the l rear tire area. I was thinking it was from the release of brake pressure. It also sounds like a loose shield. I can reproduce the noise by lightly accelerating from a stop with a slight turn of the wheel. I crawled under and all shields appeared to be tight. I brought the H2 into the dealer and they stated "Operating per design". This is driving me nuts. You can hear it over the radio. I know there is something wrong, I have been told by bystanders that something must be loose. I am bringing the H2 back in for service this afternoon. Any info on what I should tell them to check? </div></BLOCKQUOTE>
I know from past experience that catalytic converters will rattle sometimes. Do you have an aftermarket exhaust? Maybe it's just tweaked enough to vibrate on something.
I munched mine on a rock in Moab, and now it vibrates against the bottom of the bumper. Drives me nuts! 
__________________
If it has tires or testicles, you're going to have trouble with it
#10
11-01-2005, 06:12 PM
Hummer Guru
Join Date: Nov 2002
Location: Cognito
Posts: 2,155
Mine made that loose chain/ball-bearings-in-the-muffler noise. It was the heat shield on the muffler. The dealer installed a big clamp around it and it stopped.
Front end its most likely the skid plate. If not try the crossmember bolts, then the lower a-arm bolts.
«
Previous Thread
|
Next Thread
»
Thread Tools
Search this Thread
Display Modes
Posting Rules
All times are GMT +1. The time now is 04:34 PM.
Linear Mode
