Please help, 3 problems.

Klaus · #5 03-01-2004, 01:23 AM

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">

<HTML><HEAD><TITLE>Service Information</TITLE>
<META http-equiv=Content-Type content="text/html; charset=windows-1252">
<META content="Microsoft FrontPage 5.0" name=GENERATOR></HEAD>
<BODY bgColor=#ffffff>
<FORM name=topNavForm action=/servlets/CellHandler>
<TABLE width="100%" align=center>
<TBODY>
<TR>
<TD width="25%" slign="LEFT"></TD>
<TD align=middle width="50%">Document ID# 863106
2003 HUMMER
H2
</TD>
<TD align=right width="25%"></TD></TR></TBODY></TABLE>
<HR>
</FORM>
<H1>Power Window Inoperative - Passenger Door Front Door</H1>
<TABLE width="100%" border=1>
<TBODY>
<TR>
<TH vAlign=bottom align=middle>

Step</TH>
<TH vAlign=bottom align=middle>

Action</TH>
<TH vAlign=bottom align=middle>

Yes</TH>
<TH vAlign=bottom align=middle>

No</TH></TR>
<TR>
<TD vAlign=top align=left colSpan=4>

Schematic Reference: <A
href="http://127.0.0.1:9001/servlets/CellHandler?CellId=11282&RefDoc=863106">Power
Window Schematics</A> 

Connector End View Reference: <A
href="http://127.0.0.1:9001/servlets/CellHandler?CellId=11706&RefDoc=863106">Power
Door Systems Connector End Views</A> </TD></TR>
<TR>
<TD vAlign=center align=middle><A name=S01>

1</A></TD>
<TD vAlign=top align=left>

Did you perform the Door Systems Diagnostic System Check?</TD>
<TD vAlign=bottom align=middle>

Go to Step2
</TD>
<TD vAlign=bottom align=middle>

Go to <A
href="http://127.0.0.1:9001/servlets/CellHandler?CellId=12131&RefDoc=863106">Diagno stic
System Check - Door Systems</A> </TD></TR>
<TR>
<TD vAlign=center align=middle><A name=S02>

2</A></TD>
<TD vAlign=top align=left>

<LI type=1>Turn ON the ignition, with the engine OFF.
<LI type=1>Disable the window lockout function.
<LI type=1>Operate the passenger front power window in the UP and DOWN
directions from the passenger switch. </LI>

Does the passenger front power window operate properly?</TD>
<TD vAlign=bottom align=middle>

Go to Step3
</TD>
<TD vAlign=bottom align=middle>

Go to Step4
</TD></TR>
<TR>
<TD vAlign=center align=middle><A name=S03>

3</A></TD>
<TD vAlign=top align=left>

Operate the passenger front power window in the UP and DOWN directions
from the master switch.

Does the passenger front power window operate properly from the master
switch?</TD>
<TD vAlign=bottom align=middle>

Go to <A
href="http://127.0.0.1:9001/servlets/CellHandler?CellId=62112&RefDoc=863106">Testin g
for Intermittent and Poor Connections</A> in Wiring Systems </TD>
<TD vAlign=bottom align=middle>

Go to Step5
</TD></TR>
<TR>
<TD vAlign=center align=middle><A name=S04>

4</A></TD>
<TD vAlign=top align=left>

<LI type=1>Install a scan tool.
<LI type=1>Monitor the window lockout data parameter in the driver door
module inputs list.
<LI type=1>Activate the window lockout switch to both the On and OFF
positions. </LI>

Does the window lockout data parameter change state
appropriately?</TD>
<TD vAlign=bottom align=middle>

Go to Step5
</TD>
<TD vAlign=bottom align=middle>

Go to Step16
</TD></TR>
<TR>
<TD vAlign=center align=middle><A name=S05>

5</A></TD>
<TD vAlign=top align=left>

Monitor the passenger front window status data parameter in both the
driver and passenger door module input lists.

Do either passenger front window status data parameters display an
active state without a window switch activation?</TD>
<TD vAlign=bottom align=middle>

Go to Step6
</TD>
<TD vAlign=bottom align=middle>

Go to Step7
</TD></TR>
<TR>
<TD vAlign=center align=middle><A name=S06>

6</A></TD>
<TD vAlign=top align=left>

Is the active switch displayed in the driver door module input
list?</TD>
<TD vAlign=bottom align=middle>

Go to Step16
</TD>
<TD vAlign=bottom align=middle>

Go to Step15
</TD></TR>
<TR>
<TD vAlign=center align=middle><A name=S07>

7</A></TD>
<TD vAlign=top align=left>

<LI type=1>Monitor the passenger front window status in the passenger
door module inputs list.
<LI type=1>Activate the passenger power switch on the passenger door
module in the up and down positions. </LI>

Does the window status data parameter change accordingly?</TD>
<TD vAlign=bottom align=middle>

Go to Step8
</TD>
<TD vAlign=bottom align=middle>

Go to Step15
</TD></TR>
<TR>
<TD vAlign=center align=middle><A name=S08>

8</A></TD>
<TD vAlign=top align=left>

<LI type=1>Monitor the passenger front window status in the driver door
module inputs list.
<LI type=1>Activate the passenger front power window switch on the
driver door module in the up and down positions. </LI>

Does the window status data parameter change accordingly?</TD>
<TD vAlign=bottom align=middle>

Go to Step9
</TD>
<TD vAlign=bottom align=middle>

Go to Step16
</TD></TR>
<TR>
<TD vAlign=center align=middle><A name=S09>

9</A></TD>
<TD vAlign=top align=left>

<LI type=1>Connect a test lamp to a good ground.
<LI type=1>Backprobe the battery positive voltage circuit in
connectorC1 cavityD at the passenger door module. </LI>

Does the test lamp illuminate?</TD>
<TD vAlign=bottom align=middle>

Go to Step10
</TD>
<TD vAlign=bottom align=middle>

Go to Step18
</TD></TR>
<TR>
<TD vAlign=center align=middle><A name=S10>

10</A></TD>
<TD vAlign=top align=left>

<LI type=1>Disconnect the passenger front power window motor.
<LI type=1>Connect a test lamp to a good ground.
<LI type=1>Probe the power window motor up control circuit at the power
window motor harness connector.
<LI type=1>Activate the power window switch to the UP position. </LI>

Does the test illuminate?</TD>
<TD vAlign=bottom align=middle>

Go to Step11
</TD>
<TD vAlign=bottom align=middle>

Go to Step13
</TD></TR>
<TR>
<TD vAlign=center align=middle><A name=S11>

11</A></TD>
<TD vAlign=top align=left>

<LI type=1>With the test lamp still connected to a good ground, probe
the power window motor down control circuit.
<LI type=1>Activate the power window switch to the DOWN position.
</LI>

Does the test lamp illuminate?</TD>
<TD vAlign=bottom align=middle>

Go to Step12
</TD>
<TD vAlign=bottom align=middle>

Go to Step14
</TD></TR>
<TR>
<TD vAlign=center align=middle><A name=S12>

12</A></TD>
<TD vAlign=top align=left>

<LI type=1>Connect a test lamp between the power window motor up and
down control circuits.
<LI type=1>Activate the power window switch to the UP and DOWN
positions. </LI>

Does the test lamp illuminate in both positions?</TD>
<TD vAlign=bottom align=middle>

Go to Step17
</TD>
<TD vAlign=bottom align=middle>

Go to Step15
</TD></TR>
<TR>
<TD vAlign=center align=middle><A name=S13>

13</A></TD>
<TD vAlign=top align=left>

Test for an open or short to ground in the power window motor up
control circuit. Refer to <A
href="http://127.0.0.1:9001/servlets/CellHandler?CellId=62194&RefDoc=863106">Circui t
Testing</A> and <A
href="http://127.0.0.1:9001/servlets/CellHandler?CellId=61965&RefDoc=863106">Wiring
Repairs</A> in Wiring Systems.

Did you find and correct the condition?</TD>
<TD vAlign=bottom align=middle>

Go to Step22
</TD>
<TD vAlign=bottom align=middle>

Go to Step15
</TD></TR>
<TR>
<TD vAlign=center align=middle><A name=S14>

14</A></TD>
<TD vAlign=top align=left>

Test for an open or short to ground in the power window motor down
control circuit. Refer to <A
href="http://127.0.0.1:9001/servlets/CellHandler?CellId=62194&RefDoc=863106">Circui t
Testing</A> and <A
href="http://127.0.0.1:9001/servlets/CellHandler?CellId=61965&RefDoc=863106">Wiring
Repairs</A> in Wiring Systems.

Did you find and correct the condition?</TD>
<TD vAlign=bottom align=middle>

Go to Step22
</TD>
<TD vAlign=bottom align=middle>

Go to Step15
</TD></TR>
<TR>
<TD vAlign=center align=middle><A name=S15>

15</A></TD>
<TD vAlign=top align=left>

Inspect for poor connections at the passenger door module. Refer to <A
href="http://127.0.0.1:9001/servlets/CellHandler?CellId=62112&RefDoc=863106">Testin g
for Intermittent and Poor Connections</A> and <A
href="http://127.0.0.1:9001/servlets/CellHandler?CellId=61973&RefDoc=863106">Connec tor
Repairs</A> in Wiring Systems.

Did you find and correct the condition?</TD>
<TD vAlign=bottom align=middle>

Go to Step22
</TD>
<TD vAlign=bottom align=middle>

Go to Step19
</TD></TR>
<TR>
<TD vAlign=center align=middle><A name=S16>

16</A></TD>
<TD vAlign=top align=left>

Inspect for poor connections at the driver door module. Refer to <A
href="http://127.0.0.1:9001/servlets/CellHandler?CellId=62112&RefDoc=863106">Testin g
for Intermittent and Poor Connections</A> and <A
href="http://127.0.0.1:9001/servlets/CellHandler?CellId=61973&RefDoc=863106">Connec tor
Repairs</A> in Wiring Systems.

Did you find and correct the condition?</TD>
<TD vAlign=bottom align=middle>

Go to Step22
</TD>
<TD vAlign=bottom align=middle>

Go to Step20
</TD></TR>
<TR>
<TD vAlign=center align=middle><A name=S17>

17</A></TD>
<TD vAlign=top align=left>

Inspect for poor connections at the passenger front power window motor.
Refer to <A
href="http://127.0.0.1:9001/servlets/CellHandler?CellId=62112&RefDoc=863106">Testin g
for Intermittent and Poor Connections</A> and <A
href="http://127.0.0.1:9001/servlets/CellHandler?CellId=61973&RefDoc=863106">Connec tor
Repairs</A> in Wiring Systems.

Did you find and correct the condition?</TD>
<TD vAlign=bottom align=middle>

Go to Step22
</TD>
<TD vAlign=bottom align=middle>

Go to Step21
</TD></TR>
<TR>
<TD vAlign=center align=middle><A name=S18>

18</A></TD>
<TD vAlign=top align=left>

Repair the open or short to ground in the battery positive voltage
circuit. Refer to <A
href="http://127.0.0.1:9001/servlets/CellHandler?CellId=61965&RefDoc=863106">Wiring
Repairs</A> in Wiring Systems.

Did you complete the repair?</TD>
<TD vAlign=bottom align=middle>

Go to Step22
</TD>
<TD vAlign=bottom align=middle>

--</TD></TR>
<TR>
<TD vAlign=center align=middle><A name=S19>

19</A></TD>
<TD vAlign=top align=left>


<H4>Important</H4>

Perform the set up procedure for the passenger door module. Refer to <A
href="http://127.0.0.1:9001/servlets/CellHandler?CellId=71878&RefDoc=863106">Servic e
Programming System (SPS)</A> in Programming.



Replace the passenger door module. Refer to <A
href="http://127.0.0.1:9001/servlets/CellHandler?CellId=67591&RefDoc=863106">Switch
Replacement - Door Lock and Side Window - Passenger</A> .

Did you complete the repair?</TD>
<TD vAlign=bottom align=middle>

Go to Step22
</TD>
<TD vAlign=bottom align=middle>

--</TD></TR>
<TR>
<TD vAlign=center align=middle><A name=S20>

20</A></TD>
<TD vAlign=top align=left>


<H4>Important</H4>

Perform the set up procedure for the driver door module. Refer to <A
href="http://127.0.0.1:9001/servlets/CellHandler?CellId=71878&RefDoc=863106">Servic e
Programming System (SPS)</A> in Programming.



Replace the driver door module. Refer to <A
href="http://127.0.0.1:9001/servlets/CellHandler?CellId=67590&RefDoc=863106">Switch
Replacement - Door Lock and Side Window - Driver</A> .

Did you complete the repair?</TD>
<TD vAlign=bottom align=middle>

Go to Step22
</TD>
<TD vAlign=bottom align=middle>

--</TD></TR>
<TR>
<TD vAlign=center align=middle><A name=S21>

21</A></TD>
<TD vAlign=top align=left>

Replace the passenger front power window motor. Refer to <A
href="http://127.0.0.1:9001/servlets/CellHandler?CellId=11922&RefDoc=863106">Window
Regulator Motor Replacement - Front Door</A> .

Did you complete the repair?</TD>
<TD vAlign=bottom align=middle>

Go to Step22
</TD>
<TD vAlign=bottom align=middle>

--</TD></TR>
<TR>
<TD vAlign=center align=middle><A name=S22>

22</A></TD>
<TD vAlign=top align=left>

Operate the system in order to verify the repair.

Did you correct the condition?</TD>
<TD vAlign=bottom align=middle>

System OK</TD>
<TD vAlign=bottom align=middle>

Go to Step3
</TD></TR></TBODY></TABLE>
<FORM name=bottomNavForm>
<HR>

<TABLE width="100%" align=center>
<TBODY>
<TR>
<TD width="25%" slign="LEFT"></TD>
<TD align=middle width="50%">Document ID# 863106
2003 HUMMER
H2
</TD>
<TD align=right width="25%"></TD></TR></TBODY></TABLE></FORM></BODY></HTML>

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode