New style mirror connectors??

[lonePalm]

I just got the 07 mirrors and does anyone know if the connectors are the same as an 05, the ends do not look the same, but I'm looking at an 03 mirror that someone gave me. PLease help if you can, Thanks in advance.

[ttkresurfacing]

Mine plugged right in with no problem.

Tim

[HUMTECH]

They should be the same, the new style mirrors are a direct replacement for the older one unless they changed the connector on the later ones. Dont think they did though

[sanfoja]

Originally Posted by ttkresurfacing

Mine plugged right in with no problem.

Tim

X2 ...direct plug and play on my 03.

[Takecover]

Originally Posted by sanfoja

X2 ...direct plug and play on my 03.

Hey Joe, I sent you a message earlier to see it we could get together and let me check out your truck, I am in need of help on a few things if at all possible.

Jimmy
Huntsville, Al

[lonePalm]

My passenger side mirror was different not plug and play, I had to cut the old end off and resolder the new wires with the correct configurationon the old plug....but my drivers side was just plug and play, here is a pic that has one of the new connectors in compare to the old still attached to the wire from the mirror

[sanfoja]

Originally Posted by lonePalm

My passenger side mirror was different not plug and play, I had to cut the old end off and resolder the new wires with the correct configurationon the old plug....but my drivers side was just plug and play, here is a pic that has one of the new connectors in compare to the old still attached to the wire from the mirror

Man thats weird, one config in 03 different in 05 then back in 07...glad you got it to work though!

[pdsq99f4]

Originally Posted by lonePalm

My passenger side mirror was different not plug and play, I had to cut the old end off and resolder the new wires with the correct configurationon the old plug....but my drivers side was just plug and play, here is a pic that has one of the new connectors in compare to the old still attached to the wire from the mirror

Where did you get your mirror? I've replaced at least 200 of those things and never had a problem.

[Dwaxman1]

I had that same issue, it turned out that someone changed the wiring harness to try and fit in a different truck, I am still trying to solve this problem, I bought them off ebay and they screwed me, anyone know how to take these mirrors apart and what the wirting diagram looks like inside?

[lonePalm]

What I did is when I took my old mirror off I cut the old end off and resoldered the wires from the new mirror to the old connector.....you just have to look at the pattern and see what wires go where.....You have to do one wire at a time if you need help just pm me your # and ill do the best I can with the photos I have when I did it.