 |
|

10-16-2006, 05:42 AM
|
 |
Hummer Veteran
|
|
Join Date: Oct 2006
Posts: 34
|
|
Torsion Bar Question?
Hi every one  , i'm reading alot about the torsion bar adjustment so could someone post some pic's to show were is the torsion bar located and how to do the lifting thing..
Thanks 4 Reading
__________________
- HUMMER H3 Lux/Pkg (Boulder Gray) 2006
- Audi Q7 (White) 2009
|

10-16-2006, 02:29 PM
|
Hummer Expert
|
|
Join Date: May 2006
Location: Johnstown, PA.
Posts: 553
|
|
Re: Torsion Bar Question?
IMHO - have a garage that specializes in computerized alignments do they job. Mine had to be adjusted at all four corners due to what the garage said was a crappy factory alignment (nope - no charge for the latter either, only the torsion bar adjustment).
Regardless, there are many posts here that already show the adjustment. Do a search for "torsion bars" and it should lead you to the requested information.
|

10-16-2006, 11:45 PM
|
 |
Hummer Veteran
|
|
Join Date: Oct 2006
Posts: 34
|
|
Re: Torsion Bar Question?
Thanx H3.007 for the info
__________________
- HUMMER H3 Lux/Pkg (Boulder Gray) 2006
- Audi Q7 (White) 2009
|

10-17-2006, 02:43 AM
|
Hummer Expert
|
|
Join Date: May 2006
Location: Johnstown, PA.
Posts: 553
|
|
Re: Torsion Bar Question?
My pleasure
BTW - the adjustment only set me back $50.
|

10-17-2006, 04:18 AM
|
 |
Hummer Authority
|
|
Join Date: Nov 2005
Location: Mississippi
Posts: 1,776
|
|
Re: Torsion Bar Question?
Quote:
Originally Posted by H3.007
My pleasure
BTW - the adjustment only set me back $50.
|
The tire place that did mine charged $10 for the torsion turning and $40 for the alignment - so we spent the same 
|

10-17-2006, 04:24 AM
|
Hummer Novice
|
|
Join Date: Jul 2006
Location: Houston
Posts: 18
|
|
Re: Torsion Bar Question?
You can turn the torsion bars VERY easily---and it is FREE--then if you have under 12K miles, the dealer service will align it for FREE!!!
The front bar adjustments are located roughly under the divider between the front and rear doors--it is a bolt that is 1 1/8th inch. Measure from ground to bottom of fender BEFORE turning, then jack it up, turn CLOCKWISE the number of turns you want, then set down--remeasure.
I turned my Drivers front 3.5 turns and the passenger Front 2.5 turns and it looks REAL good now--drives the same and all--I am taking it in for alignment later in the week and for some other minor things. Took all of 20 minutes.
|

10-17-2006, 04:41 AM
|
 |
Hummer Authority
|
|
Join Date: Nov 2005
Location: Mississippi
Posts: 1,776
|
|
Re: Torsion Bar Question?
My dealer is 3 1/2 hours away one way...
|

10-18-2006, 01:18 AM
|
Hummer Veteran
|
|
Join Date: Jan 2006
Location: San Diego, Ca.
Posts: 162
|
|
Re: Torsion Bar Question?
Quote:
Originally Posted by westhillsat
The tire place that did mine charged $10 for the torsion turning and $40 for the alignment - so we spent the same 
|
What's your opinion of the ride since adjusting?
|

10-19-2006, 02:35 PM
|
Hummer Expert
|
|
Join Date: May 2006
Location: Johnstown, PA.
Posts: 553
|
|
Re: Torsion Bar Question?
A lot less front end sway in curves; otherwise, no difference. 
|

10-21-2006, 08:06 PM
|
 |
Hummer Professional
|
|
Join Date: Sep 2006
Location: Walnutport, PA
Posts: 292
|
|
Re: Torsion Bar Question?
I already have a fairly stiff ride on the road with the off-road package. Does this adjustment make the ride even stiffer?
(stiffer IS almost always better in most situations) 
|

10-21-2006, 09:55 PM
|
 |
Banned
|
|
Join Date: Jan 2006
Location: Central Florida
Posts: 413
|
|
Re: Torsion Bar Question?
Quote:
Originally Posted by H3PAC
I already have a fairly stiff ride on the road with the off-road package. Does this adjustment make the ride even stiffer?
(stiffer IS almost always better in most situations) 
|
I have the off-road pkg also and didn't notice much difference at all in the ride with 3 turns.
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT +1. The time now is 01:01 PM.
|