Remote Start Problems?

[tyler1bo]

Well great..that sounds comforting. And yes it's the fob start.

[Flare]

Have you tried to reprogram the FOB via the DIC? I had to reprogram 2 FOBs when i bought my H2 - came with only 1 set. I bought the FOBs on ebay for about $30 each and avoided a trip to the dealer.

[dvl57]

Originally Posted by Flare

Have you tried to reprogram the FOB via the DIC? I had to reprogram 2 FOBs when i bought my H2 - came with only 1 set. I bought the FOBs on ebay for about $30 each and avoided a trip to the dealer.

how do you manually program the remote?

I have 1 key fob remote, and an extra one...which isn't programmed.

[Flare]

FYI - you'll have to reprogram both remotes at the same time.

(from the 2008 owner's manual)
1. Press the vehicle information button (second one on the DIC) until
PRESS V (check mark) TO RELEARN REMOTE KEY displays.
2. Press the set/reset button until REMOTE KEY
LEARNING ACTIVE is displayed.
3. Press and hold the lock and unlock buttons
on the first transmitter at the same time for
about 15 seconds.
On vehicles with memory recall seats, the
first transmitter learned will match driver 1
and the second will match driver 2.
A chime will sound indicating that the
transmitter is matched.
4. To match additional transmitters at this time,
repeat Step 3.
Each vehicle can have a maximum of
eight transmitters matched to it.
5. To exit the programming mode, you must
cycle the key to LOCK/OFF.

Hope this helps.

[tyler1bo]

I'll try reprogramming it, that may be the issue. Btw, post some pics of this jewel you're ridin it. Looks like a good mod list so far!

[Flare]

Good luck and will do on the pics. I'm out of town so it'll have to wait until I get back. I did review your machine on some other threads - very nice, awesome professional pics!

[tyler1bo]

haha thanks man! Glad you think they're professional! They're just me being bored.