|
#1
06-10-2013, 09:18 AM
Hummer Expert
Join Date: Sep 2011
Location: Surprise, AZ
Posts: 717
Re: Gas Gauge Light Out
^the man is correct!
The process is pretty simple but time consuming. I'll give you a quick rundown. There are also youtube vids you can look at if you need more help.
Basically pull out the cluster
Open the cluster, remove the needles (after you mark their position), and gauge face
Then you'll see all the bulbs, you just desolder the burned out bulb base, insert a new bulb into the base and resolder the bulb and base back onto the circuit board.
LED's are a little different story......
#2
06-10-2013, 01:07 PM
Hummer Professional
Join Date: Nov 2009
Location: Windermere, FL
Posts: 297
Re: Gas Gauge Light Out
Thank you guys for your help! Not interested in LED's. Just need the gauge to work.
__________________
White 2005 SUT, Lifted 7.5" via Fabtech/custom work, Fabtech Dirt Logic 2.25 shocks, 40x15.5x22 Toyo's, black 22" Fuel wheels, 4.88 gears, Dynatech long tube headers, Magnaflow exhaust, Air-raid intake, Superchips programmer, Edlebrock panhard bar, Cognito UCA's, Kryptonite tie rods, Cognito pitman/idlar arm gussets, Hotchkis swaybars and trailing arms, Amp Research steps, E&G fender flares, PIAA SMR's, smoked roof lights (bulbs removed), black suede headliner, 13" JL's under seat
«
Previous Thread
|
Next Thread
»
Thread Tools
Search this Thread
Display Modes
Posting Rules
All times are GMT +1. The time now is 05:55 AM.
Hybrid Mode